We offer a range of ‘gaslist’ tube suitable for a wide range of applications including:

• Heating, Ventilation and Air Conditioning (HVAC).
• Compressed air.
• Steam services (note: this will be a function of the jointing system employed).
• Low pressure gas systems in buildings.
• General purpose services – water conveyance.
• Process and industrial plant.
• Fire sprinkler, protection and suppression systems.
• Cable conveyance and ducting tube.

INSTALL PLUS

Install Plus multi-certified, hot-finished tube can be used with confidence and is the professional’s choice for a wide variety of building, engineering and industrial service applications.

• Our principal ‘gaslist’ tube for UK market applications. 
• Manufactured in accordance with a range of standards, including EN10255 and EN10217-2 to satisfy both Construction Products Regulation (CPR) and the Pressure Equipment Directive (PED) requirements, where applicable.
• The perfect replacement for BS1387, which is now a withdrawn and unsupported standard.
• Install Plus uses a higher 235MPa grade of steel (compared to lower 195 grade as per BS1387) delivering improved pressure integrity.
• CE marked to CPR CAT 3 (gas/fuel) and CPR CAT 4 (water) for added confidence and application suitability.
• Suitable for pressure applications and temperature range -20 to +300ºC.
• Available in a wide range of sizes and weights.
• We are able to offer exact lengths for bulk orders.
• Available in a range of ends (plain, grooved or screwed and socketed) and surface finishes (red-painted or galvanised).
• Other special surface colours and finishes, including external epoxy and polymer coatings may also be available, please contact us to discuss your requirements.
• Our pre-grooved tube offers project savings as well as other installation benefits.
• Install Plus is fully technically supported with a wide range of available product datasheets.

INSTALL

Install tube is a robust and reliable building and engineering services solution.

• Our principal ‘gaslist’ tube for MLE market applications. 
• Single certified product, manufactured in accordance to EN10255.
• CE marked to CPD CAT 3 (gas/fuel) and CPD CAT 4 (water) for added confidence and application suitability.
• 195 steel grade.
• Suitable for pressure applications and temperature range -20 to +300ºC.
• Available in a wide range of sizes and weights.
• Available in a range of end (plain, grooved or screwed and socketed) and surface finishes (painted, polymer, epoxy or galvanised).
• Install is fully technically supported with a range of available product brochures.

Inline Plus and Inline, an exclusive range of UK manufactured, multi-certified hot-finished, pressure tube products to meet the specific needs and expectations of industrial end-users.  Suitable for use in a wide range of applications, including:

• Low pressure gas distribution and installation systems.
• High pressure gas (Inline Plus only, for pressures >16<100bar).
• Specialist industrial HVAC and water conveyance.
• Steam services.
• Petrochemical.
• Process plant.
• LPG & fuel oils (self-colour only).
• On shore gas/line pipe.
• Seamless replacement (for comparable strengths)

INLINE PLUS

Our high strength, multi-certified, hot finished HFI welded pressure tube with additional testing requirements, for specialist building and engineering services - industrial, process and linepipe solutions.

• Primary standard EN 10208-2 Grade L360NB/MB.
• EN10217-3 P355NH/TC1.
• ISO3183 L360N/M.
• API 5L Grade X52N/M PSL2.
• Generally equivalent to seamless EN10216-2.
• P355NH/TC1, EN 10208-2 L360NB, ISO 3183 L360N & API 5L X52N
• Fully aligned with PED-97/23/EC & AD 2000 W4.
• Suitable for pressure applications and temperature range -20 to +400ºC.
• Available in a wide range of sizes and wall thicknesses.
• Available in a range of end (bevelled, plain) and surface finishes (self-colour, painted, polymer, epoxy or galvanised) (Note: certain size restrictions may apply).
• For full product details, please refer to the supporting technical brochure.

INLINE

Our multi-certified, hot-finished HFI welded pressure tube for specialist building and engineering services - industrial, process and linepipe solutions.

• Primary standard EN10217-2 Grade P265GH/TC1.
• API 5L Grade B PSL1.
• API 5L Grade X42 PSL1 (≥OD219.1mm).
• EN ISO3183 L245.
• EN10208-1 L245GA.
• Generally equivalent to seamless ASTM A106 Grade B & C, ASTM A53 Grade B, EN10216-2, P265GH, EN10208-1 L245GA, EN ISO 3183 L245 & API 5L Grade B (also X42 for ≥OD219.1mm).
• Fully aligned with PED-97/23/EC & AD 2000 W4.
• Suitable for pressure applications and temperature range -20 to +400ºC.
• Available in a wide range of sizes and wall thicknesses.
• Available in a range of end (bevelled, plain) and surface finishes (self-colour, painted, polymer, epoxy or galvanised) (Note: certain size restrictions may apply).
• For full product details, please refer to the supporting technical brochure.

An exclusive range of UK manufactured, multi-certified pressure tube products to meet the specific needs and expectations of end-users.  

Inflow Plus multi-certified, hot-finished tubes are suitable for a wide range of applications, including:

• HVAC and general purpose conveyance
• Steam services
• Petrochemical
• Process plant
• Industrial conveyance
• Boiler applications (to be specified at time of order)
• LPG & fuel oils (self-colour only)
• Fire protection
• General engineering
• Wear resistance applications

INFLOW PLUS 355

Our high strength, multi-certified, hot-finished HFI welded pressure tube for general purpose and industrial conveyance solutions.

• Primary standard EN10217-3.
• Grade P355NH TC1.
• Aligned with DIN1626 and DIN17179 where applicable.
• Fine grain steel for high strength requirements.
• Specific compositional delivery conditions.
• Improved wear resistance compared to Inflow Plus 235.
• Enhanced ductility.
• Fully aligned with PED-97/23/EC and AD 2000 W4.
• Suitable for pressure applications and temperature range -20 to +400ºC.
• Available in a wide range of sizes and wall thicknesses.
• Available in a range of end# (bevelled, plain) and surface finishes# (self-colour, painted, polymer, epoxy or galvanised) (# note: certain size restrictions may apply).
• V=1.0, ultrasonic tested weldline
• For full product details, please refer to the supporting technical brochure

INFLOW PLUS 235

Our multi-certified, hot-finished HFI welded pressure tube for general purpose and industrial conveyance solutions.

• Primary standard EN10217-2
• Grade P235GH TC1
• Generally equivalent to seamless ASTM A106 Grade B & EN10216-2
• Aligned with BS3059-2, BS3602, DIN1626, ASTM A53 where applicable
• Fully aligned with PED-97/23/EC and AD 2000 W4
• Application range -20 to +400 degC
• Suitable for pressure applications and temperature range -20 to +400ºC.
• Available in a wide range of sizes and wall thicknesses.
• Available in a range of end# (bevelled, plain) and surface finishes# (self-colour, painted, polymer, epoxy or galvanised) (# note: certain size restrictions may apply).
• V=1.0, ultrasonic tested weldline
• Boiler option available, and also covers DIN1628 & 17177 (DIN1630 & DIN17175) – please specific at time of order.
• For full product details, please refer to the supporting technical brochure

INFLOW (CDC – Cold Dual Cert)

Our cold formed dual-certified HFI welded pressure tube for general pressure and engineering applications conveyance solutions.

• Primary standard EN10217-1 Grade P235TR1
• EN10219 Grade S235JRH