Brand Zenith Erw Pipes Stockist Suppliers Exporters Dealers Mumbai India

Best Quality Steel Pipes !! Genuine Suppliers of Zenith Erw Pipes, Look Up Quick Results Now!, Better Deal On Bulk Zenith Erw Pipes., Supplier of Zenith Erw Pipes India, Call us Now & Get Free Estimates!

+91- 81696 61977 | sales@alliedpipelines.com

PIPES & TUBES

• Carbon Steel Pipe
• Alloy Steel Pipe
• Stainless Steel Pipe

PIPE FITTINGS

• Carbon Steel Fittings
• Alloy Steel Fittings

Leading Zenith Erw Pipes Distributors Suppliers in India | Standard Pipe Schedules and Sizes Chart Data | Zenith Erw Pipes Stockist Suppliers Dealers Exporters Mumbai India

Zenith Erw Pipes Stockist Suppliers Dealers Exporters Mumbai India

Zenith Erw Pipes

ERW Pipes Manufacturing Process

ERW pipe is formed from hot-rolled coil produced in steel mill. All the incoming coils are verified based on the test certificate received from steel mill for their chemistry and mechanical properties.

The forming stage of ERW pipe begins with a single-width strip. The width of strip is roughly equal to the perimeter of the pipe to be produced. The edges of coil are sheared to pre-specified widths in slitting line.

The process involves uncoiling & leveling of coils and processing the same. The lead end of each coil is squared by shearing operation for threading into the mill. Then this end is joined with coil end of outgoing coil to maintain continuity in production and reduce losses.

To maintain continuity of production, it is accumulated in an accumulator/loop pit. It is then gradually and continuously formed into a circular shape by shaped rolls as per the required diameter in forming stands arranged in tandem. In the welding stand, edges of formed strip are pre heated by High Frequency Electrical Induction heating process to the desired temperature, which are mechanically pressed together horizontally to form continuous weld seam. This welding process does not need any filler metal. Instead, the welding pressure causes some of the metal to be squeezed from the joint, forming a bead of metal on inside and outside of the tube. This bead or welding flash is trimmed during the process. The weld seam is examined and adjusted as per the weld parameters, including temperature and outside diameters. The weld area of the string of the pipe so welded is then annealed, as per customer's specification by induction heating process, to get fine grain structure in weld area. It is then cooled in open followed by water quenching. Subsequently pipe string passes through sizing stands to obtain perfect roundness and diameter. The pipes are non-destructively tested by Eddy Current Process to detect any flaw in weld or otherwise as per customers requirement.

During production, online visual inspection is also carried out for surface defects, diameter accuracy, ovality and weld bead shape. Required sample rings as per specification are cut to carry out mechanical testing of weld and body e.g. flattening test, bend test etc. All pipes are then processed in finishing and testing area 
for pipe end preparation i.e. Facing/Beveling followed by hydrostatic pressure testing as per specification.

Individual pipe is then visually inspected for the parameters specified in the specification before offering to the customer's inspection, if any. Data of all tests is re-verified and submitted to the customers.

BLACK PIPES - On acceptance, all pipes are marked and/or paint stenciled as per the order requirements, packed in bundles before shifting in the storage yard. Pipes are then loaded on trailers or trucks and dispatched to the customer's site. These pipes can also be supplied with black paint/oiling &/or threading.

GALVANISED PIPES - the accepted pipes are washed in solution of caustic soda tank followed by pickling by hydrochloric acid of suitable concentration to remove oxides on pipe surface & is then dipped in fluxing tank. Pipes are then preheated & dipped in molten zinc bath. Pipes are then pulled out from the bath & wiped externally & internally for uniform & smooth zinc coating. Pipes are then cooled in quenching tank followed by passivation. Pipe ends are then threaded as per specification, if any, inspected for coating & threading defects, physical dimensions & condition before stenciling & packing.

Photos Gallery

Product Range of ERW Pipes

We can manufacture ERW Pipes in the following range:

• Pipe Diameter: 1/2" to 8"
• Thickness: 2 mm to 8 mm
• Length: As per customer's requirement (Maximum upto 12 meters)
• Capacity
                                                                                    >> For Black Pipes: 2,10,000 MT / Annum
>> For Galvanised Pipes: 1,50,000 MT / Annum

**ZBIL can supply above ERW Pipes Bare or Black or Galvanised

Applications of ERW pipes

• Agriculture and Irrigation Water Distribution, Sprinklers, Drill Rods, Bore-well etc.
• Construction Water Distribution, Fire Fighting System, Chilled Water System etc.
• Structural Scaffolding and Props, Space Frames, Fence, Green House etc.
• Industrial General Engineering, Container making, Auto Industry etc.
• Oil Sector Distribution of Gas, Crude, products.
• Electricity Conduits, poles, Transmission tower etc.

Erw Pipes	Hollow Section Pipes	Pr-Gal Pipes & Sections	Spiral Pipes

   Online Inquiry

Stainless Steel Tubing
Stainless Steel Pipe & Tube
Stainless Steel Tube
Stainless Steel EFW Pipes
Stainless Steel ERW Pipes
Welded Pipes & Tubes
Seamless Pipes & Tubes
Capillary Pipes and Tubes
Stainless Steel Heat exchanger Tube
ASTM A556 Superheater tube
Bright annealing stainless tube
Stainless Pipes for oil cracking
U bend tubes